The short answer
- 1 NodeMaven Longest sticky sessions Visit site
- 2 Novada Six-hour ISP stickiness Visit site
- 3 Decodo (ex Smartproxy) Cheapest static ISP addresses Visit site
17 best proxies for multi-account management, compared
| # | Provider | Fit | From | Readers | Protocols | Links |
|---|---|---|---|---|---|---|
| 1 | 4.7/5 | $2.20 / GB | 88% | SOCKS5, HTTP, HTTPS | ||
|
Sticky sessions quoted at up to 24 hours with unlimited concurrent sessions, and ISP plans carry unlimited traffic plus a 99.9% uptime guarantee. Good for this job
Watch out
|
||||||
| 2 | 4.5/5 | $0.50 / GB | 88% | HTTP(S) | ||
|
Rotating ISP holds an address for 360 minutes, static ISP is pitched at e-commerce and social accounts, and 120+ mobile carriers sit behind it. Good for this job
Watch out
|
||||||
| 3 | 4.3/5 | $0.08 / GB | 100% | HTTP(S), SOCKS5 | ||
|
Static residential starts at $0.27/IP, the lowest per-address figure on this page, though rotating residential sessions hold for 30 minutes only. Good for this job
Watch out
|
||||||
| 4 | 4.2/5 | $0.02 / month | 100% | — | ||
|
Static residential dedicated IPs at $2.10/IP and private at $0.926/IP, with city and ZIP targeting and a free 10-proxy plan to test on. Good for this job
Watch out
|
||||||
| 5 | 4.2/5 | $0.30 / GB | 96% | HTTP, HTTPS, SOCKS5 | ||
|
ISP from $0.98/IP with mobile, IPv4 and residential under one account, though mobile coverage reaches only 20+ countries. Good for this job
Watch out
|
||||||
| 6 | 4.1/5 | $0.35 / GB | 90% | HTTP, HTTPS, SOCKS5, HTTP/2 | ||
|
Static ISP is $3.50 per dedicated IP per month with unlimited sessions, prepaid and contract-free, but static ISP covers only 24 countries. Good for this job
Watch out
|
||||||
| 7 | 4.0/5 | $2 / GB | 80% | HTTPS, SOCKS5 | ||
|
Sticky sessions run up to 7 days and Smart Sessions keep an address in one carrier and area, but the plan is bandwidth-metered over 38+ countries. Good for this job
Watch out
|
||||||
| 8 | 3.8/5 | $0.40 / GB | 100% | — | ||
|
Dedicated ISP from $3/IP rising to 2.27K+ IPs at enterprise, alongside 175M+ residential addresses in 195 locations; residential starts at $6/GB. Good for this job
Watch out
|
||||||
| 9 | 3.6/5 | $5 / proxy | 85% | — | ||
|
Residential and corporate billed at $5 per proxy per month and mobile at $15, with 5-15% off from 10 proxies; all pool figures are unaudited. Good for this job
Watch out
|
||||||
| 10 | 3.5/5 | $2 / GB | 88% | SOCKS4, SOCKS5, HTTP, HTTPS | ||
|
Sticky IPs claimed up to 72 hours with unlimited concurrent connections, but mobile covers Poland and Ukraine only. Good for this job
Watch out
|
||||||
| 11 | 3.4/5 | $2 | 82% | HTTP/S | ||
|
IPs are described as unique and shared only with you with 60-minute sticky sessions, but static residential is marked permanently unavailable. Good for this job
Watch out
|
||||||
| 12 | 3.3/5 | ₽490 / day | 83% | SOCKS5, HTTP | ||
|
Mobile proxies rent by the day with unlimited traffic and timer-based rotation, so one address is held only as long as the rotation interval. Good for this job
Watch out
|
||||||
| 13 | 3.2/5 | $0.06 / GB | 100% | HTTP, HTTPS, SOCKS5 | ||
|
Static residential at $5/IP and 86M+ residential addresses over 200+ countries, with the rotating pool billed per GB rather than per address. Good for this job
Watch out
|
||||||
| 14 | 3.1/5 | $0.63 / GB | 86% | SOCKS5, HTTP, HTTPS | ||
|
Static residential from $1.79/IP and static datacenter from $0.79/IP in monthly bundles, with country, city and ASN targeting; founded 2024. Good for this job
Watch out
|
||||||
| 15 | 3.0/5 | — | 81% | SOCKS5, HTTP, HTTPS | ||
|
Static residential runs unlimited bandwidth but capped at 20 Mbps, with no free trial and no refunds to check the pool first. Good for this job
Watch out
|
||||||
| 16 | 2.8/5 | $0.90 / GB | 86% | HTTP, HTTPS, SOCKS5 | ||
|
Nine antidetect browser integrations, but no mobile proxies, an IP lifetime of around 24 hours and no refunds once products are sold. Good for this job
Watch out
|
||||||
| 17 | 2.3/5 | $1 | 82% | — | ||
|
Dedicated HTTP at $1.80 and multiple subnets, but shared tiers put several users on one IP, a $10 minimum applies and paypal.com is blocked. Good for this job
Watch out
|
||||||
Ordered by how well each provider fits this job, from the figures the providers publish, our review scores and reader votes — see our methodology.
Why platforms link accounts to each other
An account is rarely banned because of an IP address. It is banned because a system has decided that two or more accounts are probably one person or one operation, and that the operation is breaking a rule. The address is one signal in that decision, and usually not the deciding one.
What carries weight, roughly in order:
- Payment instruments. A card, a bank account, a payout wallet, a billing address. Hard to fake, expensive to duplicate, and usually the first thing checked. Two accounts on one card are linked whatever the IP says.
- Device and browser fingerprint. Canvas and WebGL output, font list, screen metrics, audio stack, timezone, language headers, extensions, and the TLS and HTTP/2 fingerprints of the client. Two accounts on the same laptop share nearly all of it.
- Recovery contacts. The same phone number, the same backup email, a number from the same carrier block, or two numbers that appear together on other accounts.
- Behaviour. Typing rhythm, mouse paths, the minute of day an account posts, the order of steps in a signup form, the speed of the first session.
- Content. A photo with a new crop, a recycled bio, the same link in the profile, near-identical text across accounts.
- Network. The address, the subnet, the ASN, the DNS resolver used, round-trip time to the claimed city, and the plain fact that account A and account B were both used from one address within a short window.
Platforms do not need proof. They build a graph, score the edges, and act when the score passes a threshold. That is why the same address alone rarely sinks an account: carrier-grade NAT puts thousands of unrelated handsets behind one address, so a shared IP is weak evidence on its own. It becomes strong evidence when it appears alongside a shared fingerprint, a shared card and a shared posting pattern.
The awkward part: if you run everything from one machine, one card and one phone number, buying a proxy changes the least important variable and the account still goes. Fix the address last, not first.
What an address actually gives away
An IPv4 or IPv6 address is not a name, but it is a consistent handle. What a platform can read from it:
- Geolocation. City-level from commercial databases. Often wrong by tens of kilometres, sometimes wrong by country, but it is what the site believes.
- ASN and ASN type. Whether the address belongs to a hosting company, a consumer ISP or a mobile carrier. This is the single most useful attribute for the site's risk model.
- Reverse DNS. Hosting ranges frequently resolve to something like a cloud provider's naming scheme.
- Reputation. Prior abuse reports, spam listings, and whether the address appears on published datacentre ranges or blocklists that any buyer can download.
- Latency. A claimed London user with 240 ms to a London endpoint is not in London.
The address is also only part of what leaks. DNS queries may go to your local resolver instead of through the tunnel. WebRTC can expose a local or public address that the proxy never covered. JavaScript reads the system timezone and language, which may contradict the IP's country. Those mismatches are cheap for a platform to detect and awkward to explain.
Use what-is-my-ip/ to confirm the exit address before you sign in to anything, and check the ASN and country shown alongside it, not just the number.
ISP, residential or mobile for account work
The four shapes you will be offered behave very differently:
- Datacentre. Cheap, fast, stable. The ASN says hosting, and plenty of platforms treat hosting ASNs as a negative on signup and on login. Fine for scraping public pages, poor for accounts.
- Rotating residential. Genuine consumer addresses, but drawn from a shared pool and short-lived. You will log in from one city today and another tomorrow, which is exactly the pattern platforms read as a travelling account or a shared one.
- ISP / static residential. An address registered to a consumer ISP, routed from a hosting facility, allocated to you alone and stable for the billing period. The ASN reads as residential and the address does not move. That combination is what account work wants.
- Mobile. Carrier-grade NAT behind a mobile carrier. Reputation is diluted because thousands of handsets share the address, so a single bad actor does not sink it, but the address can change mid-session and the cost is per gigabyte rather than per address.
For accounts that hold money or reputation, a static ISP address per account is the default choice. Mobile is worth the premium when the account's own story is mobile-only — a phone-first app, a market where most traffic is mobile — or when you need the durability that carrier NAT provides. Rotating residential is a scraping tool that people mistakenly point at accounts.
Be honest about the trade: ISP addresses are hosted in datacentres, and sophisticated platforms increasingly know which ranges are resold consumer space. You are buying consistency and a plausible ASN, not invisibility.
How many accounts per address
One, for anything with money, history or a public identity. The reason is not that two accounts on one address are automatically detected; it is that the address becomes a shared key. When one account is actioned, everything else on that address inherits the suspicion, and you lose the set rather than the one.
In practice, at scale, people run a small number of low-value accounts per address and isolate everything else carefully. If you do that, decide in advance how many accounts you can afford to lose together, and keep the ratio down for the ones that pay. A workable split:
- Seller, payout or client-facing accounts: one address each, no exceptions.
- Aged, warmed accounts: one address each, and do not move them.
- Disposable or test accounts: two to five per address is common, with per-account browser profiles, and you accept correlated loss.
Two rules that matter more than the ratio. Never put a new account on an address that has already had an account banned on it — the address is burnt and the reputation follows. And keep a register: which account sits on which address, when it was assigned, when it was retired. Without that, you will reuse an address by accident within a month.
Setting up one identity end to end
Do this once per account and write down every step, because a half-configured identity is worse than none.
- Allocate the address. Static ISP, in the account's country, exclusive to you. Record the address, the country and the date.
- Test the exit before you log in. With an HTTP proxy:
curl -x http://USER:PASS@HOST:PORT https://ifconfig.me. The reply should be the address you were sold. If it is your own, the proxy is not being used. - Use SOCKS5 carefully.
curl --socks5-hostname USER:PASS@HOST:PORT https://ifconfig.meresolves DNS at the proxy. Plain--socks5resolves locally and leaks the query even though the request itself goes through. - Confirm the ASN, not just the number. Look up the address in an ASN or whois tool and check it reads as the ISP you expect, in the country you expect, with sane reverse DNS.
- Give the account its own browser profile. In Chrome, profile menu then Add; in Firefox,
about:profiles. Never share a profile between accounts, and never sign in to two accounts in two tabs of one profile. - Proxy per profile, not system-wide. Firefox: Settings, then Network Settings, then Manual proxy configuration, with the SOCKS5 box ticked and remote DNS enabled. Chrome follows the operating system, so use a per-profile launch flag such as
--proxy-server="socks5://HOST:PORT"with its own--user-data-dir, or a per-profile extension. - Match the small things. Timezone, language header and locale set to the address's country, not yours. A UK address with a Kyiv timezone is a mismatch you chose.
- Leak check. Load what-is-my-ip/ and a WebRTC test in that profile. You want the proxy's address, no local address, and a DNS resolver that belongs to the proxy path. proxy-checker/ will tell you whether the address is alive and what it reports.
- First session: boring. Log in, browse, do normal things. Do not change the email, password, payout method or phone number on day one. Sudden profile edits immediately after a new network is a classic pattern.
- Then leave it alone. Same address, same profile, roughly the same working hours. Sessions that are short, identical in length and start at the same minute each day are their own signal.
What this costs per account
Account work is priced per address, not per gigabyte. The sum is straightforward: number of identities multiplied by the monthly fee per address, plus replacements. A single account on a static ISP address typically costs a few pounds or dollars a month at the cheap end and considerably more for scarce countries; put your own figure in and multiply by the number of accounts you actually intend to run, not the number you hope to.
Three costs people leave out. Replacements: assume some fraction of addresses will be burnt each quarter and budget to swap them. Attrition: the accounts you write off when an identity fails. Time: the setup above takes minutes per account, and it is not automatable without care.
Compare offers on cost per identity per month, not on headline price per gigabyte. A per-gigabyte residential plan looks cheap and is the wrong instrument for accounts, because it encourages rotating the address to save money, which is the behaviour that gets accounts linked. Mobile is billed per gigabyte and is expensive per identity, which is fine if you genuinely need it and wasteful if you do not.
Free is the most expensive option. Addresses on the free proxy list are public, shared and usually already known to the platforms you care about. They are useful for reading a geo-restricted page; they are not an identity.
Mistakes that link your accounts together
Most failures come from this list rather than from the proxy being bad.
- One browser profile for several accounts. Cookies, local storage and fingerprint are shared. The IP becomes irrelevant.
- Same recovery phone, email or card. One shared instrument links everything permanently, even after you separate the addresses.
- Logging in from home "just to check". One session on your normal connection attaches your real address to the account for good.
- System-wide proxy that fails open. When the proxy drops, traffic goes out direct. Bind the proxy to the profile or the application, not to the machine.
- DNS and WebRTC leaks. The request goes through the proxy and the DNS query does not. Cheap to check, easy to forget.
- Rotating mid-session. An address that changes between login and checkout is one of the clearest signals available.
- Reusing a burnt address. New account, old address, same reputation.
- Identical content and behaviour. Same bio, same photo, same posting minute, same session length across ten accounts.
- One mobile device for several accounts. App-level device identifiers do not care about your proxy.
- Mixing proxy and non-proxy accounts on the same machine. The direct accounts attach the device fingerprint to the device.
- Share the identity with a colleague. Two people, two locations, one account. Read the same review page you used to pick the provider, then re-read your own register.
If you take one thing from this page: separate identities first, addresses second. Our provider reviews help you judge who can supply stable addresses; they cannot supply the rest of the identity for you.
What to look for
- How long one address stays yours
- An account that changes country between logins is the clearest signal a platform has. Session length is the first number to compare.
- Shared pool or allocated addresses
- An address recycled from somebody else arrives with their reputation, and you inherit the consequences.
- ISP, residential or mobile
- ISP addresses look residential and stay put, which is the combination account work wants.
- Cost per identity per month
- This work is priced per address, not per gigabyte, so per-IP pricing is usually the cheaper shape.
- Country and carrier coverage
- Each identity has to sit where it claims to be, which needs depth in specific countries rather than a global total.
Every provider, in order
1. NodeMaven — Longest sticky sessions
4.7 / 5 for this job · from $2.20 / GB
NodeMaven takes the top spot on this page on one number: sticky sessions quoted at up to 24 hours, the longest window in this table. That figure decides how an identity looks to a platform. An account that reappears from a different city each morning is the clearest signal automation leaves, and a session held for a day covers a working session plus the gaps between them. Concurrent sessions are unlimited, so a set of identities is not queuing for slots.
The ISP product is the one to price first for account work. It carries unlimited traffic, a 99.9% uptime guarantee, 30- or 90-day renewals, and it is sold as a 20-proxy bundle. Unlimited traffic changes the arithmetic: cost stops scaling with how much each identity browses and becomes a fixed line per address. The provider quotes an ISP fraud score under 10/100 against under 5/100 for residential, and static ISP speeds under 0.1s. Residential is 30M+ IPs, mobile 250K 5G/LTE addresses, geo-targeting down to ZIP level across 190+ countries, with 23 named integrations covering antidetect browsers and automation frameworks — which is where most multi-account setups actually live.
The catch is the billing shape. Residential and mobile are per-GB, and a long sticky session does not change that: the address stays put, the traffic still draws. There is no free trial — the $3.50, 750 MB entry point is a paid demo, and a third-party write-up says free-trial access is limited to registered companies that pass KYC. Refunds are pro-rated rather than full. Smaller locations are reported to be uneven in depth, which matters if your identities sit outside the major markets. Sources also disagree on the mobile pool: 250K from the provider, 295K+ in third-party records.
Key features
- Sticky sessions up to 24 hours with unlimited concurrent sessions
- ISP plans: unlimited traffic, 99.9% uptime guarantee, 30- or 90-day renewals
- Residential 30M+ IPs; mobile 250K 5G/LTE addresses
- Geo-targeting to country, city and ISP level across 190+ countries
- HTTP, HTTPS and SOCKS5; ISP fraud score under 10/100
- 23 named antidetect-browser and automation-framework integrations
Best suited for: holding a single identity in one place through a full working day
2. Novada — Six-hour ISP stickiness
4.5 / 5 for this job · from $0.50 / GB
Novada sits second because it publishes a session figure for the middle of the market: 360-minute sticky sessions on rotating ISP proxies across 100+ countries, from $0.65/GB. Six hours is not the 24 hours at the top of this page, but it covers a working session and it comes on a rotating product rather than requiring a static commitment. Static ISP, from $1.18 per IP, is described as native ISP addresses for e-commerce and social media accounts, and dedicated datacenter at $0.72 per IP is pitched at social media management too.
The residential pool is large on paper: 100M+ IPs over 195+ countries with city-level targeting, and published country counts rather than a global total alone — 8,426,658 addresses in the United States, 3,167,312 in Brazil, 2,838,522 in the UK, 1,645,341 in Canada, 1,257,655 in France. Mobile is separate inventory at 2M+ IPs and 120+ carriers. A single credit balance covers the scraping APIs, which helps if the same operation also pulls data for the accounts it manages.
The awkward part is aimed squarely at this job. Residential sessions are stated at 1-120 minutes: fine for checking where you appear, too short to hold an identity steady, so the rotating ISP or static ISP product is what you would buy instead. Static ISP session length is not published at all. Unlimited Proxies, IPv6 and Datasets have no price on the site and go through an account manager. The free trial covers the Scraper API only; the general offer is a $10 credit. And the 99.99% success headline sits beside 99% for rotating datacenter, so it does not apply evenly across every pool.
Key features
- 360-minute (6-hour) sticky sessions on rotating ISP proxies
- Static ISP from $1.18/IP; rotating ISP from $0.65/GB
- Residential 100M+ IPs, 195+ countries, city-level targeting; sessions 1-120 minutes
- Mobile inventory 2M+ IPs across 120+ carriers
- Published country counts: US 8,426,658; Brazil 3,167,312; UK 2,838,522
- HTTP(S) support; 10GB new-user residential pack for $10
Best suited for: six-hour rotating ISP sessions where a static per-address commitment is not wanted
3. Decodo (ex Smartproxy) — Cheapest static ISP addresses
4.3 / 5 for this job · from $0.08 / GB
Smartproxy, now trading as Decodo, holds third on price per address: static residential and ISP proxies start from $0.27 per IP, the lowest per-address entry in this table. Account work is billed per identity rather than per gigabyte, so that is the figure that sets the monthly bill. The residential pool behind it is 115M+ IPs across 195+ locations, with country counts published — 16M+ in the United States, 11M+ in India, 5.6M+ in Germany, 5M+ in the UK, 4.6M+ in France.
Targeting reaches city, ZIP code and ASN level. Sticky sessions hold an address for up to 30 minutes, with the choice to rotate per request instead. The provider also publishes an average fraud score of 32.72 across its own pool against 45.57 for the wider global pool, which is a useful disclosure about address reputation — inherited reputation being the thing that sinks recycled addresses — though the scoring service behind the comparison is not named.
The catch for this job is that 30-minute cap. On residential, an address has to be re-pinned every half hour, which is a short leash for an identity that stays logged in across a working day; the static ISP product is the way round it, at a price whose country depth is published in less detail than the residential figures. Separately, the 3-day, 100 MB trial and the 14-day money-back option are mutually exclusive — taking the trial removes refund eligibility. Refunds are first-purchase only, requested within 14 calendar days, and capped below 20% of a residential plan's traffic. Pay as you go at $4/GB is wallet-only, sold a gigabyte at a time, and cannot be combined with a monthly plan.
Key features
- Static residential / ISP proxies from $0.27 per IP
- Sticky sessions up to 30 minutes
- Residential pool of 115M+ IPs across 195+ locations
- Targeting to continent, country, state, city, ZIP code and ASN
- Average fraud score 32.72 on the Decodo pool against 45.57 global
- HTTP(S) and SOCKS5; 3-day 100 MB trial
Best suited for: building a large set of static ISP identities on the lowest per-address budget
4. Webshare.io — Cheap dedicated IP bundles
4.2 / 5 for this job · from $0.02 / month
Webshare.io sits fourth because it sells addresses rather than gigabytes, which is the billing shape account work wants. Static residential starts at $6.00 a month, and the per-IP price falls as the block grows: $0.926 per IP on a private 25-IP static residential block at $23.16 a month, $2.10 per IP on a dedicated 20-IP block at $42.00 a month. Datacenter addresses run from $0.0299 down to $0.0179 per proxy with volume, and yearly billing takes a further 30% off. Ten proxies are free permanently with no card, enough to see whether the endpoints behave before paying for a set of identities.
Rotating residential targets country, state, city, ZIP code and ASN. HTTP and SOCKS5 sit on the same credentials, and IP authorisation is offered as an alternative to a username and password — handy when an antidetect profile needs to be tied to a fixed address rather than a login. Bandwidth tiers run from 250GB to unlimited, with thread limits from 500 to 3,000, and there is a Chrome extension for anyone who would rather not script it.
Read the awkward parts before buying. The unlimited bandwidth claim carries an asterisk pointing to a Fair Usage Policy, so treat the word as conditional. The provider's own pages give both 195 countries and 50+ locations, so the real footprint is hard to pin down. The static residential carrier list names Comcast and AT&T and then says "& more", which means you cannot confirm a specific carrier in advance. And the 99.7% success rate and 99.97% uptime are the provider's figures, with no independent verification alongside them.
Key features
- Static residential from $6.00/month; 25 private IPs at $0.926/IP
- Datacenter per-IP price falls from $0.0299 to $0.0179 with volume
- Permanent free plan: 10 proxies, no credit card
- Rotating residential targeting to country, state, city, ZIP and ASN
- HTTP and SOCKS5 on the same credentials; IP authorisation option
- Yearly billing saves 30%; thread limits 500 to 3,000
Best suited for: buying a small fixed block of dedicated addresses cheaply, with a free test first
5. Proxy-Seller — ISP and mobile in one account
4.2 / 5 for this job · from $0.30 / GB
Proxy-Seller is fifth, and it earns the slot on breadth of address type rather than on any single pool. ISP from $0.98 per IP and mobile from $10 per IP sit in the same account, alongside residential, IPv4, IPv6 and datacenter, with no monthly lock-ins stated. For an operation running identities of different kinds — some needing a fixed ISP address, some needing a mobile one — that means one vendor, one invoice and one set of credentials to manage. The IPv6 pool of 1,200,000+ unique addresses from $0.02 per IP is cheap inventory for identities that do not need a residential reputation, and the IPv4 channel is quoted at 1 Gbps across 600+ networks.
For procurement, the record carries ISO/IEC 27001:2022 and ISO 9001:2015 certification, GDPR, CCPA and ePrivacy compliance, DPA/SCC readiness and an EWDCI trust seal. Residential is 47M+ rotating IPs across 220+ locations. Mobile runs on 5G/4G/LTE across Vodafone, T-Mobile and Orange, with ISP speed quoted up to 1 Gbps.
The limits are in depth and in what is left unpublished. Mobile reaches 20+ countries against 220+ residential locations, so it is a supplementary tool rather than a global one, and an identity that has to look like a small market may not be placeable there. Uptime at 99.7% and connection success at 99.5%+ are the provider's own numbers with no independent test cited. Most importantly for this job, the published material states no sticky session length for any product — that is the first figure to ask about before committing a set of accounts.
Key features
- ISP from $0.98/IP; mobile from $10/IP
- Residential 47M+ IPs across 220+ locations; mobile in 20+ countries
- IPv6 pool of 1,200,000+ unique IPs from $0.02/IP
- ISO/IEC 27001:2022 and ISO 9001:2015 certified; GDPR, CCPA and ePrivacy compliant
- No monthly lock-ins stated; RESTful API, IP whitelisting and SDK
- Mobile carriers include Vodafone, T-Mobile and Orange on 5G/4G/LTE
Best suited for: teams needing ISP and mobile addresses from one vendor alongside compliance paperwork
6. ProxyEmpire — Low-cost prepaid dedicated ISP
4.1 / 5 for this job · from $0.35 / GB
ProxyEmpire is sixth because the dedicated ISP price is the low, flat number on this page: $3.50 a month for one static IP, $15 for five, $29 for ten, $56 for twenty, $135 for fifty, $260 for a hundred, and from $2.20 per IP above a thousand. All plans are prepaid with no contracts and no monthly minimums, which suits account work that grows a few identities at a time rather than in a step. GB-based plans carry rollover and unused gigabytes do not expire, so a quiet month is not money lost.
The setup meets antidetect workflows where they already are: named integrations with MultiLogin, OctoBrowser, Dolphin Anty, Kameleo and GoLogin, session control split into time-based, session-based and new-IP-on-request, and unlimited sessions and concurrent connections for approved use cases. Static ISP targeting covers country, city and ISP. If the same operation also scrapes, the residential pool is 30M+ IPs across 170+ countries with targeting to region, city, ISP, ASN and ZIP.
Two limits matter most here. Static ISP reaches 24 countries against 170+ for residential, so an identity claiming a smaller market may not be placeable on the static pool at all — check the country list before you commit a set. And the $1.97, 150 MB trial excludes static ISP and datacenter, so it does not test the product you would actually buy for accounts. The EMPIRE50 discount covers rotating residential and mobile only; static, unlimited and other flat-rate plans are excluded. Unlimited bandwidth is sold per day or week from $200/day with no rollover, and dedicated mobile covers 5+ countries and 50+ locations, dropping ZIP-level targeting to country, city and carrier.
Key features
- Static ISP $3.50/IP/month; 20 IPs $56, 100 IPs $260, 1,000+ from $2.20/IP
- Prepaid only, no contracts and no monthly minimums
- Rollover bandwidth on GB plans; unused GB never expire
- Static ISP targeting by country, city and ISP across 24 countries
- Integrations with MultiLogin, OctoBrowser, Dolphin Anty, Kameleo and GoLogin
- $1.97 trial with 150 MB that does not auto-convert to a subscription
Best suited for: growing a set of dedicated ISP identities a few at a time on prepaid terms
7. AnyIP.io — Week-long session hold
4.0 / 5 for this job · from $2 / GB
It sits seventh because seven days is a long time to hold one address, and holding one address is most of this job. Sticky sessions run up to seven days on AnyIP.io, and Smart Sessions keep the exit inside the same carrier and area for the length of that session, so an account that logs in on Monday and again on Thursday is seen from the same network both times rather than hopping carrier and city. Sessions come sticky or rotating, and IP collision prevention is included, which matters when several identities claim the same country.
The billing shape is where it stops fitting neatly. One plan covers residential and mobile together at one price with only bandwidth metered, and IPs and concurrency are unlimited, so nothing caps how many identities you point at the pool. What is metered is traffic: Micro is $25 for 5GB with extra at $5/GB, Basic is $80 for 20GB with extra at $4/GB, and the $2/GB headline is the Enterprise rate on 500GB. Account work is small-traffic work, so a few gigabytes can carry a fair number of logins, but a per-gigabyte bill moves with behaviour and that makes cost per identity per month harder to pin down than on a per-IP provider.
The catch is coverage. 38+ countries is a short list for identity work, where each account has to sit in the country it claims, and a missing country is not negotiable. There is no free trial either — Micro is the trial and it is paid up front — team seats cap at 2, 5 and 10 before Enterprise, and crypto payments sit outside the 14-day money-back guarantee that covers cards.
Key features
- Sticky sessions up to 7 days
- Smart Sessions keep the IP within the same carrier and area
- 100M+ residential and mobile IPs across 38+ countries
- Unlimited IP rotation and unlimited concurrent requests
- IP collision prevention and change-IP-by-link included
- Micro $25/mo for 5GB; extra traffic $5/GB on Micro, $4/GB on Basic
Best suited for: holding a handful of accounts on addresses that stay inside one carrier and one area for up to a week, where traffic per identity is small
8. Oxylabs.io — Dedicated ISP at volume
3.8 / 5 for this job · from $0.40 / GB
Dedicated ISP is the right product for account work and Oxylabs sells it by the address, which is why it sits here. Dedicated ISP proxies start at $3 per IP on the $30/month Starter tier, up to 10 IPs; Basic at $100 covers up to 35 IPs at $2.78 each; Flexible at $500 covers up to 192 at $2.6; Enterprise from $2,500 runs to 1.14K+ IPs at $2.2. Each identity gets an address allocated to it rather than drawn from a rotating pool, and the per-IP price falls as the account count rises. That is the shape this job wants: priced per identity, not per gigabyte.
Depth is the other half. There are 195 locations and 175M+ residential IPs alongside the ISP line, so an identity can sit where it claims. The catalogue runs on a single subscription, unit rates for every product and tier are published before you speak to anyone, and the compliance paperwork is unusually specific — ISO/IEC 27001:2022 naming Datacenter Proxies, Residential Proxies and Web API, SOC 2 Type II on two named endpoints, plus Technology E&O and cyber insurance. If procurement has to sign this off, that is the part that helps.
The catches stack up. The cheapest paid plan is $30/month and the free entry is $5 in welcome credits — under a gigabyte of residential at Starter rates — so there is no way onto an ISP allocation without paying. Enterprise goes through sales from $2,500/month. VAT may apply on Starter, Basic and Flexible, so the headline rate is not the invoice, and bitcoin is not accepted. Certification scope is per product, not company-wide, so check the product you buy is the one covered. The record also lists a separate, cheaper 'ISP Proxies' line at $1.5/IP up to 20 IPs on Starter; only the Dedicated rows carry the allocation, so be clear which one a quote refers to.
Key features
- Dedicated ISP proxies from $3/IP on the $30/mo Starter tier (up to 10 IPs)
- Dedicated ISP falls to $2.2/IP on Enterprise (1.14K+ IPs)
- 195 locations; 175M+ residential IPs
- ISO/IEC 27001:2022 names Datacenter Proxies, Residential Proxies and Web API
- Published unit rates for every product and every tier
- VAT may apply on Starter, Basic and Flexible
Best suited for: allocating one dedicated ISP address per identity at volume, with the compliance paperwork to match
9. ASocks.com — Per-proxy billing
3.6 / 5 for this job · from $5 / proxy
Per-proxy billing is why this sits mid-table and why it belongs on the page at all. Residential and corporate proxies are $5 per proxy per month; mobile is $15. Volume discounts start at ten proxies (5%), fifty (10%) and a hundred (15%). For work priced per identity, that is the right shape: one address is a fixed monthly line rather than a bill that moves with how much each account uploads, and the discounts mean a farm of fifty identities costs less per head than ten.
The record claims 150+ locations, 7M+ IP addresses, 99.7% connection success and 100,000+ clients, on the provider's own infrastructure rather than resold capacity, which it links to cleaner addresses and fewer bans. Support is 24/7 with a stated average response under ten minutes, and the provider says new features ship every week. Three lines — mobile, residential and corporate — under one account, so a mixed estate of identities does not need two vendors and two invoices.
The catch is that every figure in that paragraph is provider-reported and unaudited. Nobody outside the company has checked the 99.7%, the 7M or the 150+, and on a page where the number of identities drives the cost, an unaudited pool size is a claim rather than a measurement. Mobile at $15 per proxy per month is three times the residential rate, so mobile-backed identities need a reason to be mobile. Session behaviour is also not spelled out in the published details, and session length is the first thing to establish if you need addresses that stay put across a working week.
Key features
- Residential and corporate $5 per proxy/month; mobile $15 per proxy/month
- Volume discounts: 5% from 10 proxies, 10% from 50, 15% from 100
- 150+ locations and 7M+ IPs, provider-reported
- 99.7% connection success, provider-reported
- 24/7 support with a stated average response under 10 minutes
Best suited for: budgeting a fixed monthly cost per identity across a mixed residential and mobile estate
10. GonzoProxy — 72-hour sticky, no KYC
3.5 / 5 for this job · from $2 / GB
Seventy-two hours of sticky session is what earns the position. An identity that keeps the same exit for three days covers a working block of logins, posting and checks without a country change in the middle of it, and rotation can be triggered on demand when you actually want a new address. Unlimited concurrent connections mean the number of profiles is not the constraint.
The rest of the setup is built for running many browser profiles: ready configs for Dolphin Anty, GoLogin, Undetectable, Octo Browser, Linken Sphere and others, a REST API, targeting down to city, state, ZIP code and ASN, no KYC with access claimed in about 30 seconds, and card or crypto payment with 0% crypto fees per the provider. The first-deposit bonus doubles a deposit up to $500, which is the cheapest way onto the network. There is a 20M+ pool across 190+ countries, ISO/IEC 27001:2017, GDPR and CCPA claims, and a 24/7 Telegram helpdesk that involves technical staff.
Two catches. First, billing is per gigabyte, from $6.5/GB at 1–24GB down to $2.5/GB at a terabyte, so per-identity cost depends on what each account does — budget from traffic, not from headcount. Second, mobile proxies cover Poland and Ukraine only, so any identity claiming a carrier elsewhere is out. The demo is not free ($1.99 for 0.3GB, with a separate $4.50/1GB trial), two published residential ladders quote different rates for the same volumes, the dashboard has no detailed per-request logging, there is no browser extension or desktop app, and the speed and success figures are the provider's own. Treat the 90% ban protection for Facebook, Google and TikTok as a claim to test rather than a guarantee.
Key features
- Sticky IPs claimed up to 72 hours
- Unlimited concurrent connections on every plan
- Targeting by country, city, state, continent, ZIP code and ASN
- No KYC; access claimed live in about 30 seconds
- Ready configs for Dolphin Anty, GoLogin, Undetectable, Octo Browser, Linken Sphere
- Mobile proxies cover Poland and Ukraine only
Best suited for: running browser-profile farms on three-day sticky addresses without KYC
11. Live Proxies — Private allocated IPs
3.4 / 5 for this job · from $2
Private allocation is the whole argument and it is a good one. Live Proxies says its IPs are unique and shared only with you, which removes the problem at the centre of this job: an address recycled from another customer arrives with their history attached and you inherit whatever that history earned. No concurrency limit, unlimited threads and unlimited requests mean profile count and request rate are not capped, and IP whitelisting, dashboard and API access come with the plan.
Then the numbers get in the way, which is why it sits at eleven on a 3.6 rating. Rotation gives 60-minute sticky sessions on residential and 30 minutes on mobile. Thirty minutes is not an identity; it is barely a session. Static residential would be the obvious answer for accounts that must stay put, and the home page prices it at $65.00 a plan while the pricing page marks it permanently unavailable. The starting prices on the home page — $45.00, $65.00, $55.00 — do not reconcile with "B2C plans starting from $70" on the pricing page, so the first task is working out what a plan actually costs. SOCKS5 is B2B only, which rules it out for most small buyers.
Geography is the quieter problem: countries and state-level options are offered without a count, and state IPs are US only — no use if your identities claim to be in Brazil or Poland. The free trial goes to custom-plan users after an agreement, and B2C buyers are steered towards buying a small plan instead. Support is 24/7 with a stated seven-person team across time zones, and the B2B side runs on a 10M+ pool from $2K/month, so the enterprise offering reads considerably better than the self-serve one.
Key features
- Private IP allocation; IPs unique and shared only with you
- Sticky sessions: 60 minutes residential, 30 minutes mobile
- No concurrency limit, unlimited threads and unlimited requests
- Static residential marked permanently unavailable on the pricing page
- B2C plans from $70; B2B enterprise 10M+ IPs from $2K/month
Best suited for: buyers who need private, exclusively allocated addresses and can work within short sticky windows
12. MobileProxy.Space — Mobile addresses by the day
3.3 / 5 for this job · from ₽490 / day
Daily rental is what puts this on the list. Mobile proxies start at 490₽ per day with unlimited traffic and a minimum rental of one day, so an identity can be stood up for a campaign and stood down without a month's commitment or a gigabyte meter running in the background. Rotation runs on a timer or by hitting an API link, dead proxies are replaced automatically according to the provider, and refunds are offered for unused time in the provider's wording.
Carrier addresses are worth the trouble here for a reason that has nothing to do with this vendor: mobile IPs are shared by large numbers of ordinary phones, so a platform cannot afford to be aggressive about them without cutting off real customers, and they tend to survive longer than datacentre ranges. The dashboard is unusually complete for the price point — proxy checker, port checks, speed test, a browser proxy manager extension, API access and an MCP server for Claude Code, Cursor, Python, Node.js, PHP and cURL — with up to 250 simultaneous connections per mobile proxy. Coverage is 30+ countries and 130+ mobile operators on third-party records, against the provider's own 53 countries and 223 operators; pool size, server count and even trial length (2 hours in one record, 3 in the provider's) disagree the same way.
The catches matter for this job in particular. Daily rental gets expensive fast if an identity has to live for weeks; 490₽ a day is not a per-identity monthly rate, and third-party write-ups already call the prices relatively high. Rotation on a timer works against account work, because an address that changes on schedule changes mid-session unless you turn it off. There are reports of problems with geographical locations, laggy proxies and late-night maintenance, and there is no ISP line here, so accounts needing a fixed residential-looking address should look elsewhere.
Key features
- Mobile from 490₽/day with unlimited traffic, minimum rental one day
- IP rotation on a timer or by API link
- Up to 250 simultaneous connections per mobile proxy
- API plus an MCP server for Claude Code, Cursor, Python, Node.js, PHP and cURL
- Refunds for unused time, in the provider's wording
- 30+ countries and 130+ mobile operators per third-party records; provider states 53 and 223
Best suited for: short mobile-backed campaigns rented by the day with unlimited traffic
13. ProxySale.com — Static IPs with wide coverage
3.2 / 5 for this job · from $0.06 / GB
Proxy-Sale sits here because it sells the address outright rather than the traffic: static residential at $5/IP and static data centre at $3/IP. That is the shape multi-account work needs, since an address allocated to you for the month keeps an account looking like the same person at every login. Behind it is an 86M+ residential pool across 200+ countries, by the provider's own count, with country, state and city targeting to place each identity where it claims to be. HTTP, HTTPS and SOCKS5 are all supported on the residential product.
The per-gigabyte side of the business is the louder part of the record, and it fits this job less well. Residential pricing starts from $0.5/GB with usage billing, and the Unlimited Residential plan is $69.68 per day with no cap on IPs or traffic, offering both random and sticky rotation. Daily billing is awkward for account work, which runs for months rather than days; you would be re-buying the plan every morning. Sticky rotation on that plan helps hold a session together, but a daily meter suits a project, not a standing set of logins.
The catch on the static side is that there is no way to sample it. The 30-day zero-setup trial covers the Web Scraper API only, not the proxy network, so the addresses are bought unseen. The declared 99.9% uptime, 99.5% success rate and sub-0.6s response times are provider figures with no third-party audit shown. The service is also not available in mainland China, by the provider's own policy, which rules out identities there.
Key features
- Static residential at $5/IP; static data centre at $3/IP
- 86M+ residential IPs across 200+ countries, provider count
- Country, state and city targeting on residential
- Sticky and random rotation on the Unlimited Residential plan
- Unlimited Residential billed at $69.68/day, no IP or traffic cap
- HTTP, HTTPS and SOCKS5 on the residential product
Best suited for: buying a fixed residential or data centre address per identity rather than paying by the gigabyte
14. Floppydata — Cheapest static datacenter IPs
3.1 / 5 for this job · from $0.63 / GB
Floppydata sits here on the price of holding an address: static data centre from $0.79 per IP per month and static residential from $1.79 per IP per month, both sold in monthly bundles of 20, 50 or 100. Twenty to a hundred addresses is roughly the size of a real portfolio, and buying them as a bundle means every login gets an address that belongs to it rather than one drawn from a shared pool. The static residential line is the one that fits the job; the data centre line is cheaper but sits in ranges that platforms recognise as hosting.
The supporting detail is decent. Residential, mobile, ISP and datacenter proxies are sold under one account, targeting runs to country, city, ASN and IP type, and the provider declares a 95% clean rate across 190+ locations. Compliance is listed as SOC 2, CCPA and GDPR. Payment runs through Stripe cards plus 50+ cryptocurrencies including USDT, BTC, ETH, LTC and SOL. There is a 100 MB free trial for each of residential, datacenter and mobile.
The catches are worth stating plainly. There is no phone support, so a live voice escalation is not available, and documentation is thin for anything beyond a standard setup — custom rotation logic in particular. The 100 MB per-type trial is a connectivity check rather than a load test, so it tells you that credentials work and little about how an address behaves on the platform you care about. Performance figures such as 99.99% uptime and sub-0.3-second response times are provider claims. Third-party records date the company from 4 April 2024, so the operating record behind those claims is short.
Key features
- Static datacenter from $0.79/IP/mo; static residential from $1.79/IP/mo
- Static IPs sold in monthly bundles of 20, 50 or 100
- Targeting by country, city, ASN and IP type
- 95% clean IP rate, provider-declared
- 100 MB free trial for residential, datacenter and mobile
- 190+ locations
Best suited for: buying twenty to a hundred static residential addresses on a flat monthly per-IP bill
15. Nsocks — Unmetered static ISP
3.0 / 5 for this job
Nsocks sits here for its ISP line: long-acting ISP proxies sold alongside static residential on per-IP, fixed-monthly billing with unlimited bandwidth. An address that looks residential to a platform, does not move, and does not bill by the gigabyte is the shape account work wants — a login that sits idle for twenty hours costs nothing extra, and a long session does not run up a meter. Bandwidth on the static residential product is capped at 20 Mbps, which is ample for logins and page loads and not ample for bulk work.
The rest of the line-up is sold as separate products with separate billing — rotating, static, datacenter, ISP and unlimited — so the address product can be kept apart from the scraping product instead of mixed together. Targeting covers country and city, with ISP and ASN targeting reported by third parties. The pool is quoted at 80M+ real-user residential IPs by the provider across 190+ country and city-level regions. Anti-detect browser integrations are listed for most major browsers, alongside Playwright, Selenium and an API, which is what an account setup actually runs on. Support is 24/7 by live chat and email, and the interface is in nine languages.
The awkward parts come first here. There is no free trial, so the pool cannot be sampled before paying, and the provider states it does not refund products once sold. Its own home page quotes two different pool sizes, 80M+ and 90M+, which does not suggest the numbers are carefully maintained. Third-party records put the founding date at 26 August 2024, so the operating history is short. The declared 99.95% uptime is a provider figure.
Key features
- Static ISP and long-acting ISP proxies sold as a separate product
- Static residential billed per IP, fixed monthly, unlimited bandwidth
- Static residential bandwidth capped at 20 Mbps
- Country and city targeting; ISP and ASN targeting reported by third parties
- 80M+ residential IPs claimed by the provider
- No free trial and no refunds, per the provider
Best suited for: holding a small number of long-lived ISP addresses on flat monthly billing
16. FlyProxy — Antidetect browser presets
2.8 / 5 for this job · from $0.90 / GB
FlyProxy sits here because it is built to be plugged into an antidetect browser: nine integrations are listed, including Dolphin Anty, Multi Login, MoreLogin and Nstbrowser, and concurrent sessions are unlimited on both the provider's and the third party's account of it. If your multi-account setup already lives inside a fingerprint browser, the wiring is the least of your problems.
The address lifetime is the problem. Third-party figures put an IP at around 24 hours, with rotating ISP intervals of every 5 minutes, every 15 minutes or on each request. A day-long sticky session is workable for accounts you touch often, but it is not a fixed address, and an account that appears from a different city each morning is the pattern platforms look for. Country, state and city targeting at least holds the geography steady while the address changes. Third-party country tests put success between 96.8% in Mexico and 98.7% in Germany, with response times from 0.52s to 1.00s; the softer numbers are in the smaller markets.
The billing shape is the second problem. Residential is priced per gigabyte: $2.50/GB at 20 GB, $2.40/GB at 50 GB and $0.90/GB only at the 10,240 GB tier. Account work uses little traffic across many identities, so reaching the good rate means buying a volume you will not consume. There are no mobile proxies in the line-up, which is a weakness on platforms that weigh carrier addresses most heavily, and the provider states there are no refunds once products are sold. Pool size is quoted as over 100 million by the provider and 69 million by a third-party listing, so treat either figure with care.
Key features
- Nine antidetect browser integrations, including Dolphin Anty, Multi Login and MoreLogin
- Unlimited concurrent sessions
- IP lifetime of around 24 hours, per third-party figures
- Rotating ISP intervals of 5 minutes, 15 minutes or per request
- Country, state and city targeting
- $0.90/GB only at the 10,240 GB tier
Best suited for: fingerprint-browser setups that need many parallel sessions more than permanently fixed addresses
17. ChangeMyIP.com — Cheapest single dedicated IP
2.3 / 5 for this job · from $1
ChangeMyIP sits last because it sells the smallest unit in the table: one address at a time. Dedicated HTTP is $1.80, dedicated SOCKS5 $2.20, ShadowSocks $2.20, Trojan $3.00, DNS proxy $2.00 and Wireguard $4.00. Every plan carries unlimited bandwidth on 1Gb/s ports with no contract or long-term obligation, and activation is instant per the provider. For four or five accounts on a platform that does not scrutinise the address hard, that is a cheap way to give each login its own IP for a month.
The shared tier at $1.00 is the trap for this job. The provider says outright that shared proxies put multiple users on the same IP and that bandwidth is shared and can be slow on busy servers — exactly what an account does not want, since you inherit the reputation of everyone else on that address. Pay the extra for dedicated. The provider also blocks torrents and paypal.com at proxy level on every product, which limits what the accounts can be used for.
Two further catches. A $10 minimum order applies, so a single $1.80 proxy is not actually buyable on its own. The 30-day money-back guarantee does not apply once the service has been used; refunds are limited to bugs or slow performance. The record lists no country or city selection on these plans, and the addresses are data centre, so an identity that has to sit in a specific country is not covered. The fully anonymous and undetectable wording is unverified marketing with no published independent test. More than twelve years in the proxy business is the genuine reassurance behind the rest.
Key features
- Dedicated HTTP at $1.80; dedicated SOCKS5 at $2.20
- Unlimited bandwidth on 1Gb/s ports
- $10 minimum order
- Shared tiers put multiple users on the same IP, by the provider's own wording
- Torrents and paypal.com blocked at proxy level on every product
- 30-day money-back guarantee void once the service has been used
Best suited for: a handful of accounts on undemanding platforms where one cheap dedicated address each is enough
Multi-account management proxies: questions we get
Will a proxy stop my account being banned?
No. A proxy changes one signal out of several, and not the strongest one. Accounts are usually linked through payment instruments, recovery contacts, device fingerprint and behaviour, and if those are shared the account still goes. A dedicated address helps most when everything else about the identity is already separate.
Is multi-accounting with a proxy legal?
Running several accounts through proxies is legal in most places; what is illegal is fraud, impersonation or evading a sanction, and proxies do not change that. The common problem is not the law but the platform's terms of service, which often forbid multiple accounts outright or require them to be declared. Read the terms for the specific platform before you build anything.
Is an ISP proxy the same as a static residential proxy?
In practice the labels are used interchangeably: an address registered to a consumer ISP, hosted in a datacentre, allocated to one customer and stable for the billing period. Both terms describe the shape, not the routing. Ask the seller whether the address is exclusive to you and whether it stays the same across renewals, because those two facts matter more than the label.
Do I need a separate device as well as a separate IP?
If the accounts are on the same laptop, they share a browser and usually an operating-system fingerprint, which is a much stronger link than an IP. Separate browser profiles with separate proxy settings cover most desktop cases. If your accounts live in a mobile app, device identifiers exist at the OS level and a proxy will not touch them, so a separate device or a properly isolated emulator is the real answer.
Should I use HTTP or SOCKS5 for account management?
SOCKS5, because it carries any protocol and can resolve DNS at the proxy, which stops your local resolver leaking the domains you visit. HTTP proxies still work for browser traffic and some tools only support them. Whichever you use, confirm the DNS path in a leak test rather than assuming it.
How do I check my proxy is not leaking my real IP?
Load a public IP page inside the exact browser profile that carries the proxy, and compare what it reports with the address you were allocated. Then run a WebRTC test in the same profile and check that no local or public address appears. Finally check which DNS resolver is being used; if it belongs to your ISP rather than the proxy path, queries are leaking even though the page loads.
What happens when an address gets burnt?
Retire it. Move the surviving accounts to fresh addresses in a controlled way, log the change, and stop using the old one for anything that matters. Putting a new account on an address that has already been actioned simply transfers the reputation. If several accounts on separate addresses fail at once, the problem is elsewhere in the identity, not in the addresses.
Does the proxy country have to match the account's country?
Yes, for any account that has an established location. An account that has spent a year in one country and suddenly logs in from another is the clearest single signal a platform has. If you must move an account, do it once, deliberately, and keep everything else about the session consistent so the change has a plausible explanation.
Can two accounts share one proxy if they are never used at the same time?
They can, and it is still a bad idea for anything valuable. Platforms keep history, so the fact that A and B were never online together does not stop the address appearing in both records. The saving is one monthly fee and the exposure is both accounts at once.
Are free proxy lists ever good enough for account work?
Not for accounts. Free addresses are public, so they are shared with everyone who downloaded the same list, and their reputation is usually already poor. They are fine for reading a page that is blocked in your country. For anything with a login attached, pay for an exclusive address.
How long should an account stay on the same address?
As long as it exists, if nothing has gone wrong. Stability is the point of paying for a dedicated address, and moving for no reason throws away the most useful thing about it. Change only when the address is compromised or the account itself relocates, and treat it as a one-off event rather than routine maintenance.
Do antidetect browsers replace the need for proxies?
No, they solve different halves of the problem. An antidetect browser isolates profiles, cookies and fingerprint surfaces on one machine; a proxy gives each of those profiles its own network identity. Using either alone leaves an obvious join between accounts, which is why the two are normally sold and used together.
Other jobs people buy proxies for
All use cases and proxy types →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no cost to you. It does not change the order above — see our monetisation policy.