The short answer
- 1 Decodo (ex Smartproxy) Best all-round residential fit Visit site
- 2 Novada Best consent-sourced city depth Visit site
- 3 Floppydata Best low-cost city/ASN Visit site
17 best residential proxy providers, compared
| # | Provider | Fit | From | Readers | Protocols | Links |
|---|---|---|---|---|---|---|
| 1 | 4.7/5 | $0.08 / GB | 100% | HTTP(S), SOCKS5 | ||
|
115M+ residential IPs in 195+ locations, city/ZIP/ASN targeting, sticky sessions up to 30 minutes and residential pricing from $2/GB. Good for this job
Watch out
|
||||||
| 2 | 4.6/5 | $0.50 / GB | 88% | HTTP(S) | ||
|
100M+ residential IPs in 195+ countries, city-level targeting, 1-120 minute sessions, consent-based sourcing and residential from $1.3/GB. Good for this job
Watch out
|
||||||
| 3 | 4.5/5 | $0.63 / GB | 86% | SOCKS5, HTTP, HTTPS | ||
|
Over 65M IPs, rotating residential from $1.00/GB, 195 countries, country/city/ASN targeting and SOC 2, CCPA and GDPR stated. Good for this job
Watch out
|
||||||
| 4 | 4.4/5 | $0.02 / month | 100% | — | ||
|
80M+ IPs with city/ZIP/ASN targeting and a free 10-proxy plan; the record also gives 50+ locations against 195 countries. Good for this job
Watch out
|
||||||
| 5 | 4.3/5 | $0.30 / GB | 96% | HTTP, HTTPS, SOCKS5 | ||
|
47M+ IPs in 220+ locations at $0.30/GB, with ISO and GDPR compliance stated; city targeting and sticky windows are not published. Good for this job
Watch out
|
||||||
| 6 | 4.2/5 | $0.40 / GB | 100% | — | ||
|
175M+ residential IPs across 195 locations, ISO/SOC 2 and GDPR stated, but residential starts at $6/GB and city targeting is not published. Good for this job
Watch out
|
||||||
| 7 | 4.1/5 | $2.20 / GB | 88% | SOCKS5, HTTP, HTTPS | ||
|
30M+ residential IPs, 195+ locations, country/city/ISP and claimed ZIP targeting, sticky sessions up to 24 hours, from $2.20/GB. Good for this job
Watch out
|
||||||
| 8 | 4.0/5 | $0.06 / GB | 100% | HTTP, HTTPS, SOCKS5 | ||
|
86M+ residential IPs in 200+ countries, country/state/city targeting and residential from $0.5/GB; sticky rotation is only stated on the unlimited plan. Good for this job
Watch out
|
||||||
| 9 | 3.9/5 | $0.90 / GB | 86% | HTTP, HTTPS, SOCKS5 | ||
|
100M+ provider/69M third-party residential IPs in 195+ countries, city/state targeting and $0.90/GB only at the 10,240 GB tier; no refunds. Good for this job
Watch out
|
||||||
| 10 | 3.8/5 | $0.35 / GB | 90% | HTTP, HTTPS, SOCKS5, HTTP/2 | ||
|
30M+ residential IPs in 170+ countries with city/ASN/ZIP targeting, rollover bandwidth and EWDCI membership; residential from $3.50/GB. Good for this job
Watch out
|
||||||
| 11 | 3.7/5 | $2 / GB | 88% | SOCKS4, SOCKS5, HTTP, HTTPS | ||
|
20M+ IPs in 190+ countries with city/ZIP/ASN targeting and sticky up to 72 hours; residential entry is $6.5/GB, falling to $2.5/GB at 1TB. Good for this job
Watch out
|
||||||
| 12 | 3.4/5 | $2 / GB | 80% | HTTPS, SOCKS5 | ||
|
100M+ residential and mobile IPs, sticky sessions up to 7 days and rollover, but only 38+ countries and extra traffic at $5/GB on Micro. Good for this job
Watch out
|
||||||
| 13 | 3.2/5 | — | 81% | SOCKS5, HTTP, HTTPS | ||
|
80M+ or 90M+ residential IPs in 190+ countries with country/city/ISP/ASN targeting; no free trial, no refunds and no published residential price. Good for this job
Watch out
|
||||||
| 14 | 2.6/5 | $5 / proxy | 85% | — | ||
|
7M+ IPs in 150+ locations, sold at $5 per proxy/month rather than per GB, with no city targeting or session window published. Good for this job
Watch out
|
||||||
| 15 | 2.4/5 | $2 | 82% | HTTP/S | ||
|
Residential rotating and static products, 60-minute sticky sessions and private IP allocation, but no pool size or per-GB residential price is published. Good for this job
Watch out
|
||||||
| 16 | 2.0/5 | ₽490 / day | 83% | SOCKS5, HTTP | ||
|
Residential proxies are priced at ₽270/GB for 1 GB and ₽117/GB for 100 GB across 53 countries, while the record centres on mobile rentals. Good for this job
Watch out
|
||||||
| 17 | 1.5/5 | $1 | 82% | — | ||
|
Residential appears only as a product family; the record gives no residential pool, country count, per-GB price or targeting, and sells shared/dedicated proxies per IP. Good for this job
Watch out
|
||||||
Ordered by how well each provider fits this job, from the figures the providers publish, our review scores and reader votes — see our methodology.
What a residential proxy actually is
A residential proxy forwards your HTTP or HTTPS request out through an IP address that a consumer internet provider assigned to a home connection. The machine doing the work is still yours; the exit point is somebody's household. The site you are calling sees a consumer ISP rather than a hosting company, and that one difference is what the entire market is priced on.
Three things change when you use one:
- The ASN. Requests arrive from a consumer network rather than a range registered to a cloud provider. Many anti-bot systems score the network before they look at anything else, so this is the first gate passed.
- The geolocation. The address resolves to a country, usually a city, sometimes a postcode district. Sites that price, stock or localise by region will serve you the version a local sees.
- The reputation attached to the address. A consumer address may be shared by several households behind carrier-grade NAT. That cuts both ways: it looks ordinary, and it may already be flagged because someone else on that address misbehaved.
Sessions come in two shapes, and the distinction matters more than any other setting. Rotating means a new exit address per request or per short interval. Sticky means the same address for a defined window, usually expressed in minutes, so that a multi-step flow — cookie set, login, basket, checkout — arrives from one place. The same pool serves both patterns, and the length of the sticky window is a plan limit rather than something you can fake on the client side.
It is not a VPN. The proxy does not encrypt traffic between you and itself, and the operator can see the hostnames you request even when the payload is TLS. It is not anonymity from the provider either. If those properties are what you need, a proxy is the wrong tool.
Where the addresses come from
Three sourcing models sit behind almost every pool, and they behave differently in use.
Peer-to-peer SDK networks. An app or browser extension installed on a phone or desktop resells spare bandwidth, and traffic exits from that device's connection. Coverage is wide and the addresses are genuinely consumer-grade, but the device can go offline mid-session, so long sticky windows sometimes break.
Opt-in panels. Participants sign up deliberately and are paid for traffic through an app or dashboard. Consent is clearer and better documented, which is what a procurement team will ask about. Panels are usually smaller than SDK networks.
ISP-registered ranges. The provider leases blocks registered to an ISP but hosted in a datacentre, sold as static residential or ISP proxies. Speed and stability sit close to datacentre levels while the address looks residential on paper. Some detection vendors treat these ranges differently from true home connections, which is worth knowing before paying a premium for them.
Two practical consequences follow. First, consumer addresses churn: router reboots, DHCP lease changes, ISP reassignment. That churn is the product — fresh addresses are why residential pools keep working where a fixed list stops — and it is also why a session can die halfway through a checkout. Second, depth beats headline size. A pool with millions of addresses spread thinly can still leave you with nothing usable in the one city you need, so check country and city counts for your actual targets before you look at the total.
Residential against datacenter, ISP and mobile
These are not tiers of quality. They are different trades between speed, price, stability and how ordinary the address looks.
- Datacenter. Cheap, fast, high concurrency. The network registration says hosting, so any site with serious bot management will refuse it. Perfectly good for public data, sitemap and price checks on lenient targets, rank tracking and internal work.
- ISP or static residential. Datacentre hardware, ISP-registered address. Fast and stable, and sticky by nature because the address does not change. Good for account work where a consistent IP matters, and for targets that block hosting networks. The weakness is that a fixed range can be listed like any other.
- Rotating residential. Real consumer addresses, metered by the gigabyte, slower per request. The default for scraping at moderate volume against sites that defend themselves.
- Mobile. Carrier-grade NAT puts thousands of handsets behind one address, so the address carries a very high trust score. The most expensive per gigabyte, and the type that gets through where the other three fail: app APIs, social platforms, ticketing.
The rule of thumb is to use the cheapest type the target will accept, and to test that assumption instead of buying at the top of the range on instinct. Buying mobile traffic to read a blog is a familiar way to spend far more than the job required.
What residential traffic costs
Residential is sold by the gigabyte because the underlying resource is metered: somebody's home upload allowance and, in most networks, a payment to the person sharing it. That is why the unit is never requests or minutes, and why the pricing model rewards small payloads.
The entry rate is the number in the table above, and it is rarely the effective rate. What moves the final figure:
- Minimum top-up and expiry. Small plans often have a floor spend, and purchased traffic may expire after a set window. A cheap headline on a plan you cannot finish is expensive traffic.
- Targeting surcharges. Some providers price by country, charging more for scarce regions, and some bill city or ASN selection separately.
- Sticky and dedicated fees. Long sticky windows, dedicated addresses and static ISP ranges are usually priced per address rather than per gigabyte.
- Failed and retried requests. Billing models differ on whether a 403, a timeout or a dropped connection consumes bandwidth. Assume it might, and price your retry logic accordingly.
Work out cost per successful result instead of cost per gigabyte. Two stated assumptions make the arithmetic concrete: a full HTML page averaging 2 MB, and a JSON API response averaging 30 KB. A thousand page loads is roughly 2 GB of billable traffic; a thousand API calls is roughly 30 MB. That gap explains why the same plan looks cheap on one job and ruinous on another, and why blocking images, fonts and media at the client is the highest-return change most scrapers can make.
Cheap residential is a real category rather than automatically a false economy. Where the target blocks datacentre ranges but has no behavioural detection, a low-cost pool with shallow country depth will finish the job. Pay for depth and clean sourcing when the target is defended, when a specific city is the requirement, or when a live account is at stake.
How to set one up and target a city
Every provider hands over the same four things: a host, a port, a username and a password. Many also let you allowlist your own address instead of sending credentials, which is worth doing from a fixed office connection — a proxy password sitting in a log file is a bill somebody else runs up.
Test with one request before writing any scraper:
curl -x http://USER:PASS@gate.example.net:8000 https://ipv4.icanhazip.com
Then confirm the exit looks the way it was sold. Check the returned address with what is my IP, and read the ASN, country and city in the result. If you paid for a residential address and the network belongs to a hosting company, you have been given the wrong product.
In Python the proxy belongs in the request configuration, not in a global environment variable you will later forget:
proxies = {'http': 'http://USER:PASS@gate.example.net:8000', 'https': 'http://USER:PASS@gate.example.net:8000'}requests.get(url, proxies=proxies, timeout=30)
A common mistake: requests.Session() keeps cookies but does not keep the exit address. Stickiness lives in the proxy username, in a token the provider documents, roughly of the form USER-session-8f2c1a or USER-country-gb-city-london-session-8f2c1a. Exact tokens differ between providers and change without much notice, so read current documentation rather than copying a string from a blog post.
In a browser, Firefox exposes it at Settings → General → Network Settings → Manual proxy configuration, with a separate field for SOCKS. Chrome on Windows and macOS follows the system proxy, or you can launch it with --proxy-server=http://gate.example.net:8000; that flag does not take credentials, so expect an authentication prompt. Anti-detect browsers put host, port, username and password on each profile with a check button — use it, and make the timezone and locale match the address, because a London IP reading a Los Angeles clock is a contradiction the site can see.
City targeting is a coverage question first and a syntax question second. Not every provider carries every city, and a city label can be approximate, with the address sitting in a suburb that resolves to the metro area. If the site keys off network operator rather than city, ASN targeting is the more reliable lever. Postcode or ZIP targeting exists but is the narrowest and least dependable granularity, so treat it as a hint rather than a promise.
Legality and the sourcing question
Using a proxy is lawful in the UK, the EU and the US. It is a routing choice, not a regulated act. The questions sit around it.
What you do through it. Accessing a system without authorisation is an offence under the Computer Misuse Act 1990 in the UK, and under equivalent statutes elsewhere. A proxy does not create authorisation and does not launder intent. Using one to reach an account that is not yours, to carry on after being told to stop, or to defeat an access control is where a routing decision turns into a legal one.
Terms of service are not law. This is the awkward part most pages skate over. Breaking a site's terms is a contract issue, and the usual outcome is a blocked address, a closed account and a cancelled order rather than a prosecution. That does not make it free of consequence; it means the risk you are managing is commercial, not criminal. Scraping publicly accessible data has been litigated repeatedly and the position varies by jurisdiction, so where the data matters, take advice rather than a blog's opinion — this one included.
Personal data. Data protection law applies to what you collect, not to how you route it. Pulling names, profiles or contact details through a residential address is still processing personal data, and the proxy provider becomes a processor in the chain. Keep records.
Sourcing. Residential addresses belong to real people, and consent is the question a buyer should put first. Ask which of the models above a provider uses, whether participants are paid, how they opt out, and whether a compliance page exists. A provider that cannot answer is a supply-chain risk whatever its pool size.
Mistakes that waste residential traffic
- Retrying hard against a block. Hammering a 403 with fresh addresses burns gigabytes and teaches the target's defences. Back off, change the request and the fingerprint, and fix the cause before spending more traffic.
- Rotating inside a multi-step flow. Adding to basket, then logging in, then paying from three different addresses breaks the session, and the site is right to flag it. Pin a sticky session to the flow.
- Sticky for too long on a high-volume job. One address making thousands of requests is exactly the pattern detection looks for. Short windows cost less than a burned address.
- Downloading what you do not parse. Images, fonts, video and analytics beacons are pure waste. Block resource types at the client and the same plan lasts far longer.
- Ignoring concurrency limits. Providers cap simultaneous connections per plan; overrunning returns errors you may still be billed for.
- No keep-alive, no compression. A fresh TLS handshake per request and uncompressed HTML both add bytes and latency for nothing.
- Targeting a city when a country would do. Narrower targeting usually costs more and the pool behind it is shallower.
- Assuming scale behaves like a single request. Test at the concurrency and rate you intend to run.
- Leaving credentials in URLs, logs and error trackers. Rotate them the moment they appear somewhere they should not.
- Burning traffic on a target that blocks residential too. One proof request against a hard target saves a wasted plan. Use the proxy checker and a couple of manual calls first.
To test plumbing across address types before committing to a plan, the free proxy list is enough to prove a request path works, though not to judge a paid pool. Independent write-ups of paid providers sit in our reviews.
What to look for
- Pool size and country depth
- The headline total says little; depth in the countries you work in is what decides whether you run out of clean addresses.
- Where the addresses come from
- Residential addresses belong to real people, and how a provider obtained consent is both an ethical and a procurement question.
- Cost per gigabyte
- This is the product's unit, and entry rates differ by an order of magnitude across the table.
- City, ASN and postcode targeting
- Residential is bought to be somewhere specific, and the granularity is what you are paying the premium for.
- Rotating and sticky sessions
- The same pool serves both patterns, and the sticky window decides which jobs it can do.
Every provider, in order
1. Decodo (ex Smartproxy) — Best all-round residential fit
4.7 / 5 for this job · from $0.08 / GB
Top of the table because it has the least conditional answer to the residential question: a large pool, deep country counts, and targeting that goes below country level. The provider puts the residential pool at 115M+ IPs across 195+ locations and publishes country figures you can hold against your own traffic plan — 16M+ in the United States, 11M+ in India, 5.6M in Germany, 5M+ in the United Kingdom, 4.6M in France, 3.7M in Spain, 3M in Canada, 2M in Italy, 1M in Australia and 870K+ in the Netherlands. That kind of depth is what stops a scraper exhausting clean addresses in a mid-sized market a fortnight into a run.
Targeting covers continent, country, state, city, ZIP code and ASN, which is the granularity residential is bought for. Rotating and sticky both come off the same pool: rotate per request, or hold one address for up to 30 minutes. That window suits checkout flows, sequential page walks, and anything that sets a cookie and expects to see it again. HTTP(S) and SOCKS5 are both supported, so older SOCKS5-only clients are not excluded. Declared residential figures are an average response time under 0.5 seconds and a 99.92% success rate. Bandwidth is $3.75/GB on a 3 GB monthly plan, falling to $2.75/GB at 100 GB, with enterprise rates from $2.50/GB.
The catch sits at the edges rather than the middle. The 3-day 100 MB trial and the 14-day money-back option are mutually exclusive: taking the trial removes refund eligibility. Refunds apply to a first purchase only, must be requested within 14 calendar days, and are capped at under 20% of a residential plan's traffic or under 10% of an Enterprise plan's. Pay-as-you-go at $4/GB is wallet-only, sold a gigabyte at a time, and cannot be combined with a monthly subscription. The fraud-score comparison on the provider's own material does not name the scoring service behind the numbers. Worth knowing before you search for it: Smartproxy became Decodo in April 2025, and Smartproxy.org is an impersonator with no connection to the company.
Key features
- 115M+ residential IPs across 195+ locations (provider figures)
- City, ZIP code and ASN-level targeting
- Rotating per request or sticky for up to 30 minutes
- HTTP(S) and SOCKS5 support
- Residential at $3.75/GB on 3 GB, $2.75/GB at 100 GB
- Renamed Decodo in April 2025
Best suited for: teams that need city, ZIP and ASN targeting on a large pool with a usable sticky window
2. Novada — Best consent-sourced city depth
4.6 / 5 for this job · from $0.50 / GB
Second place goes to the provider whose sourcing story is written down most plainly. Novada states that its residential addresses are 100% legally authorised with user consent, and publishes GDPR and CCPA compliance alongside that claim. If procurement is going to ask where a hundred million addresses came from, an answer on the page is worth more than a slightly larger pool. The pool itself is stated at 100M+ residential IPs across 195+ countries with city-level targeting, plus country counts you can plan against: 8,426,658 in the United States, 3,167,312 in Brazil, 2,838,522 in the United Kingdom, 1,645,341 in Canada and 1,257,655 in France.
Sessions are stated rather than implied — 1 to 120 minutes on residential, and 360-minute (6-hour) sticky sessions on rotating ISP if a job needs the longer hold. Residential starts from $1.3/GB, and the new-user pack is 10 GB for $10, which is a real volume to test on rather than a 100 MB sample. Rotating ISP starts from $0.65/GB and mobile from $1.5/GB. Uptime on residential is given as 99.9% with sub-0.5-second response times, both provider declarations.
The awkward parts. Unlimited Proxies, IPv6 Proxies and Datasets carry no published price and are quoted through an account manager, so none of them can be budgeted from the site. The 99.99% success rate in the headline is not the figure for every pool: the provider gives 99% for rotating datacenter, so treat the top-line number as a best case. And the free trial is limited to the Scraper API. The general offer is a $10 credit, which is a different thing and not a trial of the proxy network.
Key features
- 100M+ residential IPs across 195+ countries (provider figures)
- City-level targeting with published country IP counts
- Residential sessions of 1–120 minutes; 6-hour sticky on rotating ISP
- Consent-based sourcing with GDPR and CCPA compliance stated
- Residential from $1.3/GB
- 10 GB new-user pack for $10
Best suited for: buyers who need a documented consent basis for residential addresses alongside city-level targeting
3. Floppydata — Best low-cost city/ASN
4.5 / 5 for this job · from $0.63 / GB
Third because it undercuts the two above on price without collapsing into a single-country pool. The rotating product — one endpoint covering residential, mobile and datacenter — is listed at $1.00/GB, with open discount tiers of 20% off at 96 GB and 30% off at 120 GB. Targeting covers country, city, ASN and IP type, which is the combination that makes residential useful for geo-checking and price monitoring rather than plain rotation. Static residential, static datacenter, mobile and ISP are all available under the same account, so a job that needs a fixed login address and a rotating scraping pool does not need a second vendor.
The caveats start with age. This is a young company, founded in April 2024, and much of what is published about it is provider declaration rather than third-party record. The IP pool is described as over 65 million IPs in the provider's claims and as millions of unique IPs globally in third-party listings, which are not the same statement. Locations are given as 190+ by the provider and 195 countries elsewhere. Claimed performance — 99.99% uptime, sub-0.3-second response times, a 95% clean IP rate — has no independent test cited against it. Compliance is stated as SOC 2, CCPA and GDPR.
Practical catches: there is no phone support, only live chat, email and Telegram, so a voice escalation is not on the table. Documentation is thin around advanced setups such as custom rotation logic, which is exactly where a self-serve buyer gets stuck. The free trial is 100 MB per proxy type, a connectivity check rather than a load test. Payment is Stripe cards or 50+ cryptocurrencies including USDT, BTC, ETH, LTC and SOL, and that is the main reason some buyers end up here rather than at a bigger pool.
Key features
- Rotating residential, mobile and datacenter from $1.00/GB
- 20% off at 96 GB, 30% off at 120 GB
- Country, city, ASN and IP-type targeting
- 100 MB free trial per proxy type
- SOC 2, CCPA and GDPR stated
- Cards via Stripe plus 50+ cryptocurrencies
Best suited for: bulk scraping on a tight per-gigabyte budget that still needs city and ASN targeting
4. Webshare.io — Best granular ZIP targeting
4.4 / 5 for this job · from $0.02 / month
Fourth, and the ranking line is about granularity rather than size. The rotating residential pool is put at 80M+ IPs — smaller than the three above — but it targets country, state, city, ZIP code and ASN, and it is packaged so that the targeting is not gated behind a sales call. The published country mix is uneven in a way worth reading: 6,652,539 in the United States, 1,573,702 in the United Kingdom, 1,547,939 in Germany, 1,174,275 in France, 830,343 in Spain, 646,050 in Italy, 342,282 in the Netherlands and 323,485 in Canada. For ZIP-level work in the United States that mix is generous. For Canadian postcodes it is thinner than the headline suggests.
Entry is low and the free tier is real: a permanent free plan with 10 proxies and no card required. Rotating residential is listed at $3.50/month, against $6.00/month for static residential and $2.99/month for the datacenter proxy server. HTTP and SOCKS5 run on the same credentials, and IP authorisation is offered as an alternative to username and password, which helps where a client cannot handle rotating auth. There is a Chrome extension for jobs that do not deserve a script, an API with documentation the provider calls extensive, bandwidth tiers from 250 GB to unlimited, and thread limits of 500 to 3,000.
Read the asterisk. The unlimited bandwidth claim points at a Fair Usage Policy, and what that policy permits is the number that actually governs your bill. The provider's own pages give both 195 countries and 50+ locations, a wide enough gap that the real footprint cannot be pinned down before purchase. The static residential list names Comcast and AT&T and then stops at "& more", so a specific carrier cannot be confirmed in advance. The 99.7% success rate and 99.97% uptime are the provider's own, with no independent verification alongside them.
Key features
- 80M+ rotating residential IPs (provider figure)
- Country, state, city, ZIP and ASN targeting
- Permanent free plan: 10 proxies, no card
- Rotating residential from $3.50/month; static residential $6.00/month
- HTTP and SOCKS5 on the same credentials; IP authorisation offered
- Bandwidth 250 GB to unlimited, subject to a Fair Usage Policy
Best suited for: ZIP-code-level work on a small budget where a free tier and monthly entry pricing matter
5. Proxy-Seller — Cheapest compliant country depth
4.3 / 5 for this job · from $0.30 / GB
Fifth, and the one to look at if a residential purchase has to clear a compliance review before it clears a budget line. Proxy-Seller states ISO/IEC 27001:2022 and ISO 9001:2015 certification, GDPR, CCPA and ePrivacy Directive compliance, DPA/SCC readiness and an EWDCI trust seal, and pairs that with an entry rate of $0.30/GB on residential. The pool is declared at 47M+ rotating IPs across 220+ locations — a fraction of what the top four quote — and no per-country counts are published, so treat the location figure as breadth rather than proof of depth in the country you actually need.
Protocol support is HTTP, HTTPS and SOCKS5, with a RESTful API, IP whitelisting and SDK access. The provider specifies a 1 Gbps IPv4 channel across 600+ networks, up to 1 Gbps on ISP proxies, and 1,200,000+ unique IPv6 addresses for IPv6-heavy work. Sourcing is described as ethically sourced from verified network providers worldwide. Support is advertised as 24/7 human with a 30-second median reply, and there are no monthly lock-ins stated. Declared performance is 99.7% uptime, 99.5%+ connection success and around 0.35-second residential response — all provider figures, with no third-party test cited alongside them.
The clear weakness is mobile: 20+ countries against 220+ residential locations, on Vodafone, T-Mobile and Orange across 5G/4G/LTE. If a job needs mobile addresses outside that short list, this is not the account for it, whatever the residential rate says. The second weakness is evidence. Success rate, uptime and response time are declarations, so budget for paid traffic on your own targets before committing to volume rather than assuming the headline holds.
Key features
- 47M+ rotating residential IPs across 220+ locations (provider figures)
- Residential from $0.30/GB
- ISO/IEC 27001:2022 and ISO 9001:2015 certified; GDPR, CCPA, ePrivacy
- DPA/SCC ready with an EWDCI trust seal
- HTTP, HTTPS and SOCKS5 with RESTful API and IP whitelisting
- Mobile reach limited to 20+ countries
Best suited for: procurement-led buyers who need certification paperwork and a low entry rate more than the largest pool
6. Oxylabs.io — Largest enterprise residential pool
4.2 / 5 for this job · from $0.40 / GB
Sixth in the table and first on pool size: the provider claims 177M+ IPs in total, 175M+ of them residential, across 195 locations. That is the largest residential figure here, and it is paired with the only pricing structure in this list published tier by tier for every product, so a budget can be modelled before anyone gets on a call. Residential runs $6/GB on Starter at $30/month, $5/GB on Basic at $100/month, $4/GB on Flexible at $500/month, and $2.5/GB at enterprise level, where plans start at $2,500/month and traffic runs to 1K+ GB. One subscription carries the whole catalogue.
It is also the most procurement-friendly of the group, with a caveat worth reading carefully. ISO/IEC 27001:2022 covers three named products — Datacenter Proxies, Residential Proxies and Web API — and SOC 2 Type II covers two named endpoints, the Scrape endpoint and Web Unblocker. Technology E&O and cyber insurance apply across all products, and GDPR compliance and EU AI Act alignment are stated. Certification scope is per product, not company-wide, so "ISO certified" here does not mean every product in the catalogue is in scope.
Where it loses ground is the entry point. The only free offering is $5 in welcome credits, which is under a gigabyte of residential traffic at Starter rates — enough to check that your code speaks to the endpoint, not enough to judge success rates against a defended target. Starter itself is $30/month, and VAT may apply on Starter, Basic and Flexible, so the headline rate is not always the invoice. Bitcoin is not accepted. For a small job the arithmetic rarely works; at 1K+ GB the per-gigabyte rate is competitive with anything above it in this list.
Key features
- 175M+ residential IPs within a 177M+ total pool, 195 locations (provider figures)
- Published tiers: $6/GB Starter, $5/GB Basic, $4/GB Flexible, $2.5/GB Enterprise
- ISO/IEC 27001:2022 and SOC 2 Type II, each scoped to named products
- Technology E&O and cyber insurance across all products
- Free entry is $5 in welcome credits, under 1 GB of residential traffic
- Enterprise plans from $2,500/month; no Bitcoin
Best suited for: large-volume residential work where pool size and published per-tier pricing both matter
7. NodeMaven — Best long sticky sessions
4.1 / 5 for this job · from $2.20 / GB
NodeMaven sits at seven because it is the card you pick when a job needs one address to hold for a long time rather than many addresses quickly. Sticky sessions are quoted at up to 24 hours with unlimited concurrent sessions, which is a different shape of product from the request-per-IP rotation most per-GB pools default to. A session that survives a working day covers logged-in flows, multi-step checkouts, basket and pricing walks, and anything where the target ties the cookie to the address.
The pool is 30M+ residential addresses on the provider's figure, with geo-targeting across 190+ countries down to ZIP level claimed by the provider; a third-party listing puts coverage at 150+ countries and 1,400+ cities, which is the more conservative number to plan against. Country, city and ISP targeting are listed, alongside HTTP, HTTPS and SOCKS5, a RESTful API and 23 named integrations across antidetect browsers and automation frameworks. Traffic rolls over on both pay-as-you-go and monthly plans, and there is a quality guarantee of $1 in bonus traffic for each confirmed blacklisted proxy.
Entry is $2.20/GB, and the awkward part is that there is no free trial: the $3.50, 750 MB option is a paid demo, and a third-party write-up says the free-trial route is limited to registered companies that pass KYC. At volume the per-GB traffic model gets expensive quickly, smaller locations are reported to be uneven in depth, and refunds are pro-rated rather than full. Mobile pool size also disagrees between sources: 250K from the provider against 295K+ in third-party records.
Key features
- Sticky sessions up to 24 hours
- Unlimited concurrent sessions
- 30M+ residential IPs on the provider's count
- Country, city and ISP targeting, with ZIP claimed
- HTTP, HTTPS and SOCKS5
- $2.20/GB entry; $3.50 for a 750 MB paid demo
Best suited for: work where one address has to hold a session for hours rather than rotate on every request
8. ProxySale.com — Best high-country cheap pool
4.0 / 5 for this job · from $0.06 / GB
Proxy-Sale.com takes eighth because the pool is large and cheap per gigabyte, and the country list is the longest in this part of the table. 86M+ residential addresses across 200+ countries on the provider's own count, with country, state and city targeting and usage-based billing on the residential product.
Price is the argument. Residential pricing starts at $0.5/GB with billing based on usage, and the $0.06/GB figure on the table belongs to the Video Downloader API, not the residential pool — a distinction worth checking before you budget. Static addresses are $5/IP for residential and $3/IP for data centre. The Web Scraper API bills only for successfully delivered results and carries a 30-day zero-setup trial. Protocols are HTTP, HTTPS and SOCKS5, and both random and sticky rotation exist on the unlimited residential plan.
The catches are real. The 99.9% uptime, 99.5% success rate and sub-0.6s response time are all provider-declared with no third-party audit shown, so treat them as claims rather than measurements. The free trial covers the Web Scraper API only, not the proxy network. Unlimited Residential is billed at $69.68 per day, which suits a burst and sits badly against a job that runs for a fortnight. And the service is not available in mainland China by the provider's own policy, which rules it out if that is a market you collect from.
Key features
- 86M+ residential IPs, provider's own count
- 200+ countries and regions
- Country, state and city targeting
- Residential pricing from $0.5/GB, billed on usage
- HTTP, HTTPS and SOCKS5
- Unlimited Residential at $69.68 per day
Best suited for: country-heavy scraping where breadth of coverage matters more than audited performance figures
9. FlyProxy — Best high-volume tier price
3.9 / 5 for this job · from $0.90 / GB
FlyProxy is ninth because the tier ladder, not the entry price, is where it earns the slot. Residential runs $2.50/GB at 20 GB and $2.40/GB at 50 GB — ordinary numbers — but $0.90/GB at the 10,240 GB tier. For a job that genuinely moves terabytes that changes the arithmetic. For one that moves twenty gigabytes it does not, and this card should not be read as a cheap option at small volumes.
The pool is described as over 100 million addresses by the provider and 69 million by a third-party listing; the gap is worth knowing before you assume country depth. Coverage is more than 195 countries and regions, with targeting down to state and city in third-party records, and unlimited concurrent sessions stated by both the provider and the third-party review. Third-party country tests put success between 96.8% in Mexico and 98.7% in Germany, with response times from 0.52s to 1.00s — the strong markets are strong and the smaller ones softer. Nine antidetect browser integrations are listed, the interface is localised into nine languages, and the company has been trading since 2023.
The catch is that there are no refunds once products are sold, stated by the provider itself. There are no mobile proxies in the line-up. A third-party listing says there is no free trial while the provider advertises 500M of free traffic through sales, so ask rather than assume either way. Pool size, protocol list and dashboard availability disagree between the provider's own pages and the third-party listing, and IP lifetime is put at around 24 hours — long enough for a session, not for a week-long job.
Key features
- $0.90/GB at the 10,240 GB tier; $2.50/GB at 20 GB
- 100M+ IPs on the provider's count, 69M in a third-party listing
- 195+ countries and regions, with state and city targeting
- Unlimited concurrent sessions
- Third-party country success rates from 96.8% to 98.7%
- No refunds once products are sold
Best suited for: terabyte-scale collection where the top-tier rate rather than the entry price sets the budget
10. ProxyEmpire — Best rollover with targeting
3.8 / 5 for this job · from $0.35 / GB
ProxyEmpire sits tenth because rollover plus deep targeting is a pairing few on this list offer together. Unused gigabytes roll over and never expire on GB-based plans, so a month that comes in under budget is not money burnt, and all plans are prepaid with no contracts and no monthly minimums. Residential targeting runs to country, region, city, ISP, ASN, OS/TCP and ZIP — the granularity you are actually paying the residential premium for.
The pool is 30M+ residential addresses across 170+ countries on the provider's figures, with unlimited sessions and concurrent connections for approved use cases. Protocols cover HTTP, HTTPS, SOCKS5 and HTTP/2, and there is a public API with an endpoint generator. Rotating Residential runs $3.50/GB pay-as-you-go down to $1.50/GB on the 1,000 GB monthly plan, with custom pricing from $0.75/GB at 1 TB and above. A $1.97 trial gives 150 MB and does not auto-convert into a subscription. The provider is a certified member of the Ethical Web Data Collection Initiative.
The catches are in the shape of the catalogue rather than the residential product. The $0.35/GB headline on this table is rotating datacenter, not residential. Unlimited bandwidth is priced per day or week with no rollover, from $200/day. Coverage thins outside residential: 62 datacenter countries and 24 static ISP countries, and dedicated mobile reaches only 5+ countries and 50+ locations with targeting cut back to country, city and carrier. The EMPIRE50 code excludes static and flat-rate plans, and the site quotes its Trustpilot score as both 4.6 and 4.5.
Key features
- Rollover bandwidth; unused GB never expire
- 30M+ residential IPs across 170+ countries
- Targeting to country, region, city, ISP, ASN, OS/TCP and ZIP
- Rotating Residential from $3.50/GB pay-as-you-go to $1.50/GB at 1,000 GB
- $1.97 trial for 150 MB, no auto-conversion
- HTTP, HTTPS, SOCKS5 and HTTP/2
Best suited for: projects that need city and ASN precision without forfeiting unused spend at the end of the month
11. GonzoProxy — Best 72-hour sticky targeting
3.7 / 5 for this job · from $2 / GB
GonzoProxy is eleventh because a 72-hour sticky window is the longest here bar one, and it comes with the widest targeting list at this price point. Country, city, state, continent, ZIP code and ASN filtering, rotating and sticky sessions both, unlimited concurrent connections, and traffic that never expires and rolls over to the next plan.
The pool is 20M+ real addresses from a peer network across 190 countries. That is smaller than the pools ranked above it and should be read as depth in major markets rather than everywhere. Access is live in about 30 seconds with no KYC, payments are crypto or card with 0% fees on crypto per the provider, and the provider claims ISO/IEC 27001:2017 certification with GDPR and CCPA compliance. Ready configs exist for Dolphin Anty, Go Login, Undetectable, Octo Browser and Linken Sphere, plus a REST API. A first-deposit bonus doubles your deposit up to $500. Residential runs $6.5/GB at 1 GB down to $2.5/GB at 1 TB on the headline ladder.
The catches matter. Mobile proxies cover Poland and Ukraine only, so mobile-first work is out unless those are your markets. The dashboard lacks very detailed per-request logs, which is a genuine gap when you are debugging a failing job. There is no browser extension and no native desktop app, so everything runs in the web interface. The demo is not free: $1.99 for 0.3 GB, with a separate trial row at $4.50 for 1 GB. Two published residential ladders quote different per-GB rates for the same volumes, so confirm which applies at checkout, and the published speed and success figures are the provider's own with no independent verification on its site.
Key features
- Sticky sessions claimed up to 72 hours
- 20M+ real addresses across 190 countries
- Filtering by country, city, state, continent, ZIP and ASN
- Traffic never expires and rolls over to the next plan
- No KYC; access live in about 30 seconds
- Mobile proxies limited to Poland and Ukraine
Best suited for: long-hold sessions pinned to a specific ZIP or ASN, funded in crypto and started without KYC
12. AnyIP.io — Best week-long sticky
3.4 / 5 for this job · from $2 / GB
AnyIP.io closes the list because a 7-day sticky session is the longest in the table, and the plan does not charge separately for rotation, threads or proxy type. Residential and mobile come on one plan at one price with only bandwidth metered, so a job that moves between the two mid-run does not need a second contract or a second invoice.
Sessions can hold an address for up to seven days. Smart Sessions keep the IP inside the same carrier and area, which is what stops a mobile session drifting onto a different operator halfway through a task. Filtering runs to country, ISP, region and precise GPS coordinates, and the last of those is the genuinely unusual option here. Unlimited rotation and unlimited concurrent requests are included, with IP collision prevention, change-IP-by-link, quota control and API access. Unused data rolls over to the next billing cycle on every plan. Plans are month to month: $25 for 5 GB, $80 for 20 GB, $300 for 100 GB and $1,000 for 500 GB, with a 14-day money-back guarantee.
The catches are arithmetic. The advertised $2/GB is the Enterprise rate; on Micro extra traffic is $5/GB and on Basic $4/GB, so the entry plans cost materially more per gigabyte than the headline suggests. 38+ countries is a short list for global work, and team seats are capped at 2, 5 and 10 before Enterprise. Crypto payments sit outside the refund policy while the guarantee covers card purchases only, and there is no free trial — the Micro plan is the way in, and it is paid up front.
Key features
- Sticky sessions up to 7 days
- Residential and mobile on one plan, only bandwidth metered
- Unlimited IP rotation and unlimited concurrent requests
- 38+ countries; country, ISP, region and GPS coordinate filtering
- Unused data rolls over each billing cycle
- $2/GB is the Enterprise rate; extra GB is $5 on Micro and $4 on Basic
Best suited for: week-long sessions that need both mobile and residential addresses without splitting them across two plans
13. Nsocks — Broad pool without trial
3.2 / 5 for this job
Nsocks sits near the bottom of this table, and the pool is not the reason. The provider claims 80M+ real-user residential IPs, its home page quotes 190+ country and city-level regions with country and city targeting, and third-party write-ups add ISP and ASN targeting on top. That granularity is what a residential buy is actually for. The catch starts early: the same home page also quotes 90M+ IPs, so two pool figures sit side by side and neither is audited.
The product set is wide for a young company — rotating residential, static residential, datacenter, ISP and unlimited proxies, each sold as a separate product on separate billing. Residential runs per gigabyte in tiers from 10 GB to 500 GB; static residential is billed per IP by the month with unlimited bandwidth rather than metered traffic. Payment covers crypto, Alipay, WeChat Pay and UPI, the dashboard carries traffic statistics, the interface runs to nine languages, and there are listed integrations for most anti-detect browsers plus Playwright, Selenium and an API. Stated uptime is 99.95% and the provider counts 3,500+ clients.
The catch is that you cannot inspect any of it before paying. There is no free trial, and the provider states it does not support refunds on products sold. Third-party records date the company to 26 August 2024, so the operating history behind those claims is short. If your procurement depends on a small paid sample to judge address quality in the countries you work in, this vendor gives you nothing to judge with.
Key features
- 80M+ real-user residential IPs claimed; home page also quotes 90M+
- Country and city targeting stated, with ISP and ASN targeting reported by third parties
- Rotating, static, datacenter, ISP and unlimited proxies billed as separate products
- Residential sold per GB in tiers from 10 GB to 500 GB
- No free trial; provider states no refunds on products sold
- Founded 26 August 2024 per third-party records; 99.95% uptime stated
Best suited for: buyers who want city-level targeting across a broad pool and can carry the cost of judging it without a trial
14. ASocks.com — Best per-proxy budget
2.6 / 5 for this job · from $5 / proxy
ASocks takes fourteenth and earns its line on billing structure rather than pool depth. Residential is $5 per proxy per month, the same rate as its corporate line, with mobile at $15. Volume discounts begin at 10 proxies (5%), 50 (10%) and 100 (15%). Per-proxy pricing on a residential product is unusual — most of this table sells gigabytes — and it turns an unpredictable metered bill into a fixed monthly line, which is the whole argument for placing it here.
The stated pool is 7M+ addresses across 150+ locations, with a 99.7% connection success rate and 100,000+ clients. All four figures are provider-reported and unaudited, and that matters more than usual because 7M+ is a fraction of the pool size quoted by several vendors on this page. The provider runs its own infrastructure and links that to cleaner addresses and fewer bans. It also states an average support response under 10 minutes, releases features weekly, and describes the pool as expanding in geography and address count every day.
The catch is depth. 7M+ addresses across 150+ locations tells you nothing about how many clean addresses exist in the one country or city your job needs, and nothing in the record fills that gap. Mobile at $15 against $5 for residential is a steep step if the work turns out to need carrier addresses. The G2 line — rated #1 by customers — comes from the provider's own summary of its own customers, not from anything checkable here.
Key features
- $5 per proxy/month for residential and corporate; $15 per proxy/month for mobile
- Volume discounts of 5% from 10 proxies, 10% from 50, 15% from 100
- 150+ locations and 7M+ IP addresses, provider-reported and unaudited
- 99.7% connection success rate stated by the provider
- Own proxy infrastructure, with support averaging under 10 minutes in the provider's wording
Best suited for: per-proxy budgeting on residential jobs where a metered per-gigabyte bill is the risk you want to remove
15. Live Proxies — Best private IP allocation
2.4 / 5 for this job · from $2
Live Proxies is fifteenth, and its case is exclusivity rather than scale. The provider sells private IP allocation: addresses it describes as unique and shared only with you, with no concurrency limit, unlimited threads and unlimited requests. For residential work built on a small number of persistent sessions rather than a wide crawl, that changes what you are buying — access held open, not volume burned through.
Sticky windows are 60 minutes on rotating residential and 30 minutes on rotating mobile, which covers logged-in flows and multi-step checkouts. Anything longer has to go to the static line, and that line is a problem: the home page prices static residential at $65.00 per plan while the pricing page marks it permanently unavailable. Home page starting prices of $45.00, $65.00 and $55.00 also fail to reconcile with the pricing page's "B2C plans starting from $70"; the entry plan shown there is 200 IPs and 4 GB over 30 days at $70.00. Geography is described only as available countries or state-level options with no count, and state IPs are US only. SOCKS5 is B2B only, so a B2C stack needing it is out of scope.
What holds up: unused bandwidth rolls over to the standby plan, dashboard access, API access and IP whitelisting are included, support runs 24/7 across a seven-person team in different time zones, and the enterprise tier sits on a 10M+ IP pool at $2K per month. The free trial, though, goes to custom plan users after an agreement — smaller buyers are told to purchase the smallest plan instead.
Key features
- Private IP allocation: addresses stated as unique and shared only with you
- No concurrency limit, unlimited threads and unlimited requests stated
- 60-minute sticky sessions on rotating residential, 30 minutes on rotating mobile
- Unused bandwidth rolls over to the standby plan
- Static residential marked permanently unavailable on the pricing page
- SOCKS5 listed on the B2B tier only
Best suited for: holding a small number of exclusive residential addresses open for long sessions instead of running high-volume crawls
16. MobileProxy.Space — Best mobile-led residential add-on
2.0 / 5 for this job · from ₽490 / day
MobileProxy.Space is sixteenth because it is a mobile vendor first and residential is the add-on. That ordering is worth stating plainly: mobile addresses survive automation longer than residential ones, and its mobile plans bill by rental period with unlimited traffic and a one-day minimum, which is the cheapest way on this page to learn whether a job works at all. Residential is the weaker half of the offer.
Residential is sold per gigabyte on 30-day terms, from 270 per GB at the 1 GB tier down to 225 at 5 GB, 180 at 10 GB, 135 at 50 GB and 117 at 100 GB. Those are not bargain rates, and third-party write-ups say the prices are relatively high. The provider's numbers and third-party records also disagree across the board — pool size 267,370,000 against 2M+, countries 53 against 30+, operators 223 against 130+, servers 1,356 against 700+, trial 3 hours against 2 hours — so any single figure deserves suspicion. Some customers have reported problems with geographical locations, and there are reports of laggy proxies and late-night maintenance windows.
What you do get: mobile and dedicated datacenter proxies under one account, rotation on a timer or by hitting an API link, automatic replacement of dead proxies in the provider's wording, refunds for unused time, and an API with an MCP server for Claude Code, Cursor, Python, Node.js, PHP and cURL. The dashboard carries a proxy checker, port checks, a speed test and a browser proxy manager extension, and there is a blog of more than 1,000 proxy-industry articles.
Key features
- Mobile from 490₽/day with unlimited traffic and a one-day minimum rental
- Residential tiers: 270 per GB at 1 GB falling to 117 per GB at 100 GB, 30-day terms
- Rotation on a timer or via an API link; dead proxies replaced automatically per the provider
- Pool and coverage figures conflict: 267,370,000 IPs and 53 countries from the provider against 2M+ and 30+ in third-party records
- API plus an MCP server for Claude Code, Cursor, Python, Node.js, PHP and cURL
Best suited for: teams whose core requirement is mobile addresses and who want a residential line on the same account rather than a second contract
17. ChangeMyIP.com — Cheapest shared proxy test
1.5 / 5 for this job · from $1
ChangeMyIP is last, and its line is honest about the job it does: the cheapest way on this page to put a proxy in front of a script and find out whether the script works. Shared HTTP and shared SOCKS5 are $1.00, dedicated HTTP $1.80, SOCKS5 and ShadowSocks $2.20, Trojan $3.00, DNS proxy $2.00 and Wireguard VPN $4.00, with unlimited bandwidth, 1Gb/s ports, multiple IP subnets and no contract. By its own count the provider has been selling HTTP and SOCKS5 for more than twelve years.
Now the parts that decide whether this is residential work at all. Those rows are per-proxy shared and dedicated products, not a per-gigabyte residential pool, and the record carries no pool size, no country count and no city, postcode or ASN targeting. Shared means multiple users on the same IP address with shared bandwidth, and the provider says performance can suffer on busy servers. Torrents and paypal.com are blocked at the proxy level on every product. A $10 minimum order applies even for a single $1.00 proxy, and the 30-day money-back guarantee does not apply once the service has been used — refunds are limited to bugs or slow performance. The "fully anonymous and undetectable" line is unverified marketing with no published independent test behind it.
Treat the entry price as a protocol and configuration test, not a residential rate. For proving a client, a rotation script or a headless stack before you spend on a real pool, it is the least money at risk in this table.
Key features
- Shared HTTP and shared SOCKS5 at $1.00; dedicated HTTP $1.80, SOCKS5 $2.20
- Unlimited bandwidth, 1Gb/s ports, no contract, instant activation stated
- $10 minimum order even for a single shared proxy
- Torrents and paypal.com blocked at proxy level on every product
- Shared IPs and shared bandwidth, which the provider says can be slow on busy servers
- 30-day guarantee does not apply once the service has been used
Best suited for: a cheap smoke test of a client, protocol or rotation script before committing to a per-gigabyte residential pool
Residential proxies proxies: questions we get
Do I need residential proxies to scrape a website?
Often not. If the target serves public pages without bot management, datacentre addresses are cheaper and faster, and there is no reason to pay per gigabyte. Residential earns its price when the site blocks hosting networks or when you need to look like a local customer.
Can I use residential proxies with Playwright or Selenium?
Yes. Playwright takes a proxy object with server, username and password at browser or context level, which handles authentication cleanly. Selenium's proxy support does not accept credentials directly, so you either use an allowlisted IP or put a local forwarding tool in front of it that adds the username and password for you.
Why do my residential proxies keep getting blocked?
Work out whether the block is at address level or behaviour level. If every fresh address fails the same way, the site is probably reading your TLS fingerprint, header order, request rate or cookie state rather than your IP. Rotation cannot fix a request that looks automated.
How long should a sticky session last?
As short as the flow needs and no longer. A login and checkout usually takes a few minutes; a long-running job should rotate rather than hold one address. Longer windows are often a paid feature, so check what you are actually buying before asking for an hour.
Are free residential proxies a real option?
Rarely. Free lists are mostly open proxies and mislabelled datacentre addresses, with no consent chain, no support and no guarantee the operator is not logging or altering your traffic. They are useful for testing that your code sends a request through a proxy, and not much else.
Does a residential proxy encrypt my traffic?
No more than without one. HTTPS is negotiated between your client and the destination site, so the payload stays encrypted, but the proxy operator can see which hosts you contact and when. If you need the exit node to see nothing at all, that is a different product.
Do residential proxies work on sneaker and ticket sites?
They help with the network layer and are close to mandatory on drops, but they are one input among several. Those sites also read browser fingerprints, timing, account history and queue position, and many limit purchases per address or per payment method. Mobile addresses often fare better than residential on the hardest of them.
Why does the exit IP show a different city to the one I selected?
Geolocation databases disagree with each other, and consumer routing does not always follow municipal boundaries. A suburb can resolve to the metro area, and carrier-grade NAT can place an address at the carrier's regional gateway. Check two lookup services and try ASN targeting if city selection keeps missing.
What happens when a plan's traffic runs out mid-job?
Requests start failing, usually with authentication or quota errors rather than clean refusals, and half-finished jobs are harder to resume than ones you stopped deliberately. Set a usage alert, keep headroom above your expected monthly burn and design the job to pause cleanly rather than retry into a wall.
Is a residential proxy overkill for price monitoring?
Usually. Retail pages that show public prices to anyone are commonly readable through datacentre addresses, and the payloads are heavy enough that per-gigabyte billing adds up fast. Move to residential only for the regions or competitors that actually block you.
Other proxy types
All use cases and proxy types →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no cost to you. It does not change the order above — see our monetisation policy.